Home

Recently on Cyclingnews.com


Dauphiné Libéré
Photo ©: Sirotti

North American Handmade Bicycle Show, February 29, 2009

Serotta embarks on a curvy new direction
Photo ©: James Huang
(Click for larger image)
This is far more surface area around the bottom bracket
Photo ©: James Huang
(Click for larger image)
The cutout seat tube can be made in angles ranging from 73-78º
Photo ©: James Huang
(Click for larger image)
The integrated design uses a seatmast cap
Photo ©: James Huang
(Click for larger image)
The top tube looks to flow into the seat stays.
Photo ©: James Huang
(Click for larger image)
The beefy head tube houses a tapered 1 1/8"-to-1 1/2" steerer.
Photo ©: James Huang
(Click for larger image)
The hourglass profile looks trick
Photo ©: James Huang
(Click for larger image)
Internal routing is used throughout.
Photo ©: James Huang
(Click for larger image)
The Meivici AE will use compact rear-entry dropouts.
Photo ©: James Huang
(Click for larger image)
Serotta will offer the new Meivici AE in a wide range of custom geometry
Photo ©: James Huang
(Click for larger image)
Serotta is clearly looking to shed its somewhat stuffy image
Photo ©: James Huang
(Click for larger image)
Production seatmasts will use a single-bolt head borrowed from Bontrager.
Photo ©: James Huang
(Click for larger image)
The production version will also use a tidy clamp system.
Photo ©: James Huang
(Click for larger image)
The existing Meivici SE will continue on
Photo ©: James Huang
(Click for larger image)
These Zipp VumaQuad cranks were refinished by Serotta.
Photo ©: James Huang
(Click for larger image)
More gold is found out back with the custom-finished cogs,
Photo ©: James Huang
(Click for larger image)
Craig Edwards' eebrake makes an appearance in gold trim
Photo ©: James Huang
(Click for larger image)
Completing the look are a custom-finished Easton carbon stem and Zipp bar,
Photo ©: James Huang
(Click for larger image)
Serotta's cyclo-cross prototype mates the front end of a Meivici
Photo ©: James Huang
(Click for larger image)
According to Serotta's Paraic McGlynn, the titanium rear end
Photo ©: James Huang
(Click for larger image)
Carbon tubes and lugs are used up front.
Photo ©: James Huang
(Click for larger image)
Titanium sleeves are used to bond the seat tube and down tube
Photo ©: James Huang
(Click for larger image)
How's this for a bold new look?
Photo ©: James Huang
(Click for larger image)
Serotta is playing with some new graphics
Photo ©: James Huang
(Click for larger image)
This Serotta 29er hardtail uses carbon fiber for the top tube and down tube
Photo ©: James Huang
(Click for larger image)
Stout stays promise a snappy rear end.
Photo ©: James Huang
(Click for larger image)
Detail work is impressive to say the least.
Photo ©: James Huang
(Click for larger image)
The shape of the non-driveside dropout is mimicked
Photo ©: James Huang
(Click for larger image)
Serotta paid homage to its racing heritage
Photo ©: James Huang
(Click for larger image)
Wonder what the UCI would say about this sort of design today?
Photo ©: James Huang
(Click for larger image)
Naked builder Sam Whittingham took 'Best in Show' honors last year
Photo ©: James Huang
(Click for larger image)
Even the linkage is fully curved, mitered and welded,
Photo ©: James Huang
(Click for larger image)
Whittingham uses FSA headsets for the main linkage pivot
Photo ©: James Huang
(Click for larger image)
Even the Manitou Swinger shock
Photo ©: James Huang
(Click for larger image)
The nickel-plated chain stays take a graceful curve
Photo ©: James Huang
(Click for larger image)
The main pivot is widely braced.
Photo ©: James Huang
(Click for larger image)
Whittingham also makes the wood-inlay pivot caps.
Photo ©: James Huang
(Click for larger image)
The lower shock mount is neatly integrated into the lug.
Photo ©: James Huang
(Click for larger image)
A small eccentric allows for tensioning the chain
Photo ©: James Huang
(Click for larger image)
The nickel-plated head tube lugs are fitted
Photo ©: James Huang
(Click for larger image)
The rear brake line is fed through the seat stay
Photo ©: James Huang
(Click for larger image)
The entry point for the rear brake line is underneath the down tube
Photo ©: James Huang
(Click for larger image)
Naturally, Whittingham built his own bar, too.
Photo ©: James Huang
(Click for larger image)
Why use a boring rubber grip
Photo ©: James Huang
(Click for larger image)
These sizeable pedals bore some awfully sharp spikes.
Photo ©: James Huang
(Click for larger image)
Wooden rims are sourced from Wheel Fanatyk.
Photo ©: James Huang
(Click for larger image)
Whittingham crafted a wooden seatpost
Photo ©: James Huang
(Click for larger image)
The anodized White Brothers fork matches perfectly.
Photo ©: James Huang
(Click for larger image)
Will it be two in a row for Whittingham?
Photo ©: James Huang
(Click for larger image)
Naked also showed off a nice-looking townie.
Photo ©: James Huang
(Click for larger image)
It goes without saying that there's an awful lot of embellishment
Photo ©: James Huang
(Click for larger image)
Whittingham says a blacksmith friend of his
Photo ©: James Huang
(Click for larger image)
The Shimano generator-power front light
Photo ©: James Huang
(Click for larger image)
The front brake line and generator wire
Photo ©: James Huang
(Click for larger image)
More nice work is found on the seat tube.
Photo ©: James Huang
(Click for larger image)
Another pair of leaves is found at the back end.
Photo ©: James Huang
(Click for larger image)
Wood is used for the rear rack, fenders and rims.
Photo ©: James Huang
(Click for larger image)
This pedal is decidedly more friendly-looking.
Photo ©: James Huang
(Click for larger image)
When regular Lock-Ons just won't do.
Photo ©: James Huang
(Click for larger image)
Colorado-based builder Black Sheep
Photo ©: James Huang
(Click for larger image)
The cruiser-style frame sports dual top tubes
Photo ©: James Huang
(Click for larger image)
Faux lugs are featured throughout.
Photo ©: James Huang
(Click for larger image)
Paragon dropouts and more careful sandblasting work
Photo ©: James Huang
(Click for larger image)
Black Sheep builder James Bleakley has taken a liking
Photo ©: James Huang
(Click for larger image)
The truss-style fork is also fast becoming a Black Sheep mainstay.
Photo ©: James Huang
(Click for larger image)
The seat stays are anchored to the seat tube
Photo ©: James Huang
(Click for larger image)
These look comfy!
Photo ©: James Huang
(Click for larger image)
An idyllic life under a starry night sky.
Photo ©: James Huang
(Click for larger image)
Black Sheep also displayed this monstrous titanium utility bike.
Photo ©: James Huang
(Click for larger image)
How many separate pieces of titanium can you see here?
Photo ©: James Huang
(Click for larger image)
We can only imagine how much this would cost.
Photo ©: James Huang
(Click for larger image)
The massive rack looks to boast massive load capacity to match.
Photo ©: James Huang
(Click for larger image)
Tiny generator-powered LED lights are fitted front and rear.
Photo ©: James Huang
(Click for larger image)
A comfy place to set your hands
Photo ©: James Huang
(Click for larger image)
Bleakley uses a Shimano front derailleur clamp adapter
Photo ©: James Huang
(Click for larger image)
Black Sheep also looks to be working on a more conventional rack.
Photo ©: James Huang
(Click for larger image)
The giant 36"-wheeled Black Sheep ZAMer makes another appearance.
Photo ©: James Huang
(Click for larger image)
Waterford built this shiny beauty
Photo ©: James Huang
(Click for larger image)
Maybe a sign of a pending Waterford head tube badge?
Photo ©: James Huang
(Click for larger image)
The so-called 'art deco' lugs recount classic New York architecture.
Photo ©: James Huang
(Click for larger image)
Mmmm, shiny.
Photo ©: James Huang
(Click for larger image)
Waterford built this custom machine
Photo ©: James Huang
(Click for larger image)
Hellekson is a captain in the US Air Force.
Photo ©: James Huang
(Click for larger image)
Not a bad 'welcome back' gift, eh?
Photo ©: James Huang
(Click for larger image)
A gleaming stainless steel chain stay
Photo ©: James Huang
(Click for larger image)
Gunnar adds a new Fastlane model to its range
Photo ©: James Huang
(Click for larger image)
The chain stay mounted disc brake
Photo ©: James Huang
(Click for larger image)
Waterford is also building this unique machine
Photo ©: James Huang
(Click for larger image)
This giant gusset is preparing for some rough riding.
Photo ©: James Huang
(Click for larger image)