Home  Cyclingnews TV   News  Tech   Features   Road   MTB   BMX   Cyclo-cross   Track    Photos    Fitness    Letters   Search   Forum  

Recently on Cyclingnews.com


Bayern Rundfahrt
Photo ©: Schaaf


On Test: Polar CS600 with Power, January 26, 2009

An unconventional approach to power meters

The Polar CS600 packs a lot of features
Photo ©: John Stevenson
(Click for larger image)
Installation of all of the various bits on to the bike
Photo ©: John Stevenson
(Click for larger image)
The chain stay sensor (middle) monitors chain tension and cadence
Photo ©: John Stevenson
(Click for larger image)
Data can be downloaded on to your home PC
Photo ©: John Stevenson
(Click for larger image)
The 1.5" LCD screen can display a wide range of information.
Photo ©: Paul Verkuylen
(Click for larger image)
A real-time graph provides a quick visual indicator
Photo ©: Paul Verkuylen
(Click for larger image)
The home screen can even be customized
Photo ©: Paul Verkuylen
(Click for larger image)
The included ProTrainer 5 software
Photo ©: Polar
(Click for larger image)
Configurable screens can display as much or as little information
Photo ©: Polar
(Click for larger image)

Polar offers up an unusual way to measure power output with its CS600 with Power computer but Cyclingnews' Paul Verkuylen proclaims it to still be a reasonable – though somewhat erratic – choice nonetheless.

Polar's CS600 with Power takes a unique look at how to measure power output on a bicycle. In contrast to direct-measurement units such as Quarq, SRM or Powertap that use integrated strain gauges – or even indirect ones such as iBike which back-calculate power by measuring opposing forces – the CS600 displays power based on two key elements: chain tension and chain speed. Polar then calculates the vibrational frequency of the chain – and thus chain tension – and derives power output from there.

The computer head receives its information from two wireless 2.4Ghz sensors: one on the chain stay that measures the chain frequency and another on the lower pulley wheel of the rear derailleur to measure chain speed. A separate fork-mounted sensor is used for speed calculations and cadence is measured as function of fluctuations in power output.

But does it work?

For the most part, yes, but the CS600 is not without its quirks and pitfalls.

As always, sending any sort of data over a wireless frequency always has drawbacks and the CS600 is not immune to any of these. We experienced occasional interference during testing that affected all aspects of the meter including heart rate, speed, power and cadence. Thankfully we were never without a reading for extended periods, and estimate that the CS600 worked over 90 percent of the time – but even that is a letdown at this price.

Also, the very nature of Polar's power measuring system has some inherent disadvantages that are directly related to the somewhat convoluted way by which it produces its data. Baseline information such as chain stay and chain length and even chain weight must be manually inputted – and are thus subject to user error – and subtle geometry variations resulting from changing gears aren't directly accounted for as far as we can tell. Moreover, since the chain's vibrational frequency is a fundamentally critical piece of the equation, riding on especially bad surfaces such as dirt roads can muck up the data.

As a result, even Polar itself only claims +/- 2.5 percent accuracy on average but a disappointing +/- 10 percent at any given instant. In comparison, both SRM and Quarq claim +/- 2 percent accuracy, and Powertap claims +/- 1.5 percent both on average and instantaneous. Shortening the Polar's sampling rate to a single second helps in this regard somewhat but it also quickly eats up the onboard memory to a point where it isn't useful for longer rides.

So while the CS600 may not be the best power meter for recording power spikes and obtaining absolute figures, its nominally consistent readings still make it reasonably useful for tracking longer-term trends and even basic data such as average and maximum power output plus left vs. right power balance can still provide useful information. Even so, more serious users will likely want to search elsewhere and data junkies who are looking for as much real-time precision as possible will likely be disappointed.

The software

The included ProTrainer 5 software is one that many may already be familiar with and hence should be a cinch for longtime Polar users to get their head around. For those new to the game, a comprehensive user guide is incorporated into the software and other third party software suites like CyclingPeaks WKO are also set up to handle Polar's data.

The user interface is probably one of Polar's strong points. Years of constant redesign and evaluation have lead to the current incarnation of the suite, which is easy to use and set up.

Capable of storing not only the power, speed and heart rate data, the suite is built like a training diary so you can record how you felt, the weather conditions and much more for each training session. These files can also be sent to your coach or advisor for further analysis.

Pending pre-configured training plans can also be uploaded directly to the head unit itself which means you can never use the excuse that you forgot that it was ‘interval day' again. Moreover, the system will even guide you through the session so that you make the most efficient use of your training hours.

Other functions

As one would guess from the Polar name, the CS600 does do more than just measure power. In fact, we could fill another entire screen full of additional functions the CS600 performs, but will cover the basics and most commonly used functions here.

The CS600 is also a fully featured heart rate monitor with programmable zones – and associated audible and visual alarms – plus a built-in test protocol to help calibrate the system for those who don't already know their maximum heart rate and threshold figures. Obviously an individual's numbers will need to be adjusted over time, but it still provides a very good starting point for the uninitiated.

A full array of speed and distance functions are on tap as well, and the CS600 also incorporates a barometric altimeter, which will display altitude and gradient as you climb. As with all barometer-based systems, instantaneous accuracy can be a bit spotty and proper calibration is critical. Polar also even includes a calorie counter, too, and all of the information is shown on various user-selectable displays on a highly legible 1.5" LCD screen.

All of the recorded data can be transferred to your home PC via an infrared transmitter. An optional USB infrared transmitter is available if your PC is not equipped with one as standard. Mac users, however, are completely out of luck unless you run a Windows emulator.

Installation and set-up

The CS600's accuracy is not only highly dependent on the user-inputted data described above, but also how the unit itself is installed. The installation process itself can be described as tedious at best and trial-and-error seems to be an unwritten step at several points along the way.

The chain speed sensor is easy enough. Polar supplies an array of replacement pulley wheel bolts to fit a variety of Shimano and Campagnolo drivetrains. A SRAM-specific bolt is not included, but the Shimano bolt fit our group nicely. Once the bolt is replaced with the one provided, the sensor is simply bolted on to the outside of the derailleur. The associated wire can then be wound around the derailleur cable housing and connected to the other sensor on the chain stay.

The sensor on the chain stay is where care need to be taken. Polar says the chain must run directly above the central axis of the sensor and as close to it as possible (around 2mm) yet also near enough to the crank so that the cadence sensor can detect the magnet. It's a delicate balancing act for sure and only more so on bikes with curved stays. Polar provides three different sizes of supporting pieces in order to cater for the vast array of frame designs.

A seat stay-mounted battery case provides both sensors with the necessary power. All in all, the complete wiring harness is relatively compact but still clutters the rear end of the bike somewhat and doesn't look nearly as integrated as some competing systems.

Speed sensor and head unit installation are at least straightforward; both attach easily with a pair of zip-ties though the former's non-user-replaceable battery will undoubtedly create some convenience issues down the road.

With the inclusion of a calorie counter, the CS600 is well suited for those looking for a complete training tool on a budget and are willing to sacrifice some accuracy.

Overall

The CS600 is best suited for budget-minded riders who are looking to start using a power meter as a means of improving the quality of their training and can live with its shortcomings. Though less accurate than some of its bigger competition – and decidedly less tidy looking – it still packs a comparable feature set at much lower cost, and the included software package does an excellent job of both recording your efforts and keeping you on track.

Polar's CS600 is still among the least expensive power meters on the market, but newcomers such as the iBike have made the lower-cost power meter race more than a one-horse show. Polar's second attempt into the power meter market has come a long way since its early days on the scene but it clearly will need to step up its game in order to remain competitive from here.

Price:AU$1299; US$709.95
Weight:300g (complete set including computer head, WIND power harness, speed sensor, chest transmitter and all hardware)
Pros: Appealing price for a power meter, loads of functions,still among the lightest options out there
Cons: Not as accurate as some other units, tedious installation, battery pack and sensors are a little bulky, suffers from some interference and vibration issues
Cyclingnews rating: Click for key to ratings
More information: www.polarusa.com

For a thumbnail gallery of these images, click here

Images by John Stevenson

Images by Paul Verkuylen/Cyclingnews.com

Images by Polar

Images by Polar